| * Types SVO, SVTO, SJO, SJTO,SO,STO,HSO and HPN have jackets which are also recognized from oil resistance at 60 degrees celcius and lower temperature. |
| ** Types SJ, SJO, SJTO, S, SO, ST and STO may be made with water resistance insulation with in.WATER RESISTANT in. printed on jacket. |
| ** Types SJO, SJT, SJTO, SO, ST, STO, SPt-1 and SPT-2 may be made for outdoor use, with in.W-A in. printed on the jack after the Type designation ( example: TYPE SJTW-A) |
| ** Types TPT, SPt-1, SPT-2, SPT-3, HPN, SVO, SJO, SJTO, SO, ST, STO ( the parallel conductor types are limited to two conductor construction) may be made in retractile form. |
| ** Types SV, SVO, SVT, SVTO, SJ, SJT, SJTO, SJTO, S, SO, STO may be made with foil, serve or brald shields under the jacket and are printed in.SHIELDED in. |
| *** Temperature rating higher 60 degrees celsius are printed on jacket except for heater cordage Types HPN.HPN and HPD heater cordage are rated 90 degrees celsius for core only 60 degrees celsius ( or special 75 degrees celsius and 90 degrees celsius) for jacket only. |
| + Also recognized by Underwriters' Laboratories, Inc. In three conductors when th third conductor (with green Insulation) is used for appliance or equipment grounding. |
| += Insulation and jacked thickness depend on cord size. THicknesses shown are for 18 and 16 AWG. |
| 1 Note SRD or SRDT-3-conductor versions can be made in braidless parallel construction with .110 in. normal insulation. |
|
| |
Cord Type |
AWG Size Range |
No. Of Conductors |
Conductors Isulation |
Jacket |
Temp Rating STD. |
Other |
Voltage Rating |
|
|
TP |
27 (Tinsel) |
2 |
0.030 Rubber |
-- |
60 |
-- |
260 |
|
|
TPT |
27 (Tinsel) |
2 |
0.030 Plastic |
-- |
60 |
75, 90, 105 |
250 |
|
|
SP-1 |
18 |
2+ |
0.030 Rubber |
-- |
60 |
-- |
300 |
|
|
SPT-1 |
18 |
2+ |
0.030 Plastic |
-- |
60 |
-- |
300 |
|
|
SP-2 |
18-16 |
2+ |
0.045 Rubber |
-- |
60 |
-- |
300 |
|
|
SPT-2 |
18-16 |
2+ |
0.045 Plastic |
-- |
60 |
75, 90, 105 |
300 |
|
|
SP-3 |
18-12 |
2+ |
0.060 Rubber++ |
-- |
60 |
75, 90 |
300 |
|
|
SPT-3 |
18-12 |
2+ |
0.060 Plastic++ |
-- |
60 |
-- |
300 |
|
|
TS |
27 (Tinsel) |
2 |
0.015 Rubber |
0.030 Rubber |
60 |
-- |
125 |
|
|
TST |
27(Tinsel) |
2 |
0.015 Plastic |
0.030 Plastic |
60 |
75, 90 |
125 |
|
|
SV |
18 |
2+ |
0.015 Rubber |
0.030 Rubber |
60 |
-- |
300 |
|
|
SVO* |
18 |
2+ |
0.015 Rubber |
0.030 Neoprene |
60 |
-- |
300 |
|
|
SVT |
18-17 |
2+ |
0.015 Plastic |
0.030 Plastic |
60 |
75, 90, 105 |
300 |
|
|
SVTO* |
18-17 |
2+ |
0.015 Plastic |
0.030 Plastic |
60 |
75, 90, 105 |
300 |
|
|
SJ |
18-10 |
2-5 |
0.030 Rubber++ |
0.030 Rubber++ |
60 |
75 |
300 |
|
|
SJO* |
18-10 |
2-6 |
0.030 Rubber++ |
0.030 Neoprene++ |
60 |
75, 90 |
300 |
|
|
SJT |
18-10 |
2-6 |
0.030 Plastic++ |
0.030 Plastic++ |
60 |
75, 90, 105 |
300 |
|
|
SJTO* |
18-10 |
2-6 |
0.030 Plastic++ |
0.030 Plastic++ |
60 |
75, 90, 105 |
300 |
|
|
S |
18-2 |
2 or More |
0.030 Rubber++ |
0.060 Rubber++ |
60 |
75 |
600 |
|
|
SO |
18-2 |
2 or More |
0.030 Rubber++ |
0.060 Neoprene++ |
60 |
75, 90 |
600 |
|
|
ST |
18-2 |
2 or More |
0.030 Plastic++ |
0.060 Plastic++ |
60 |
75, 90, 105 |
600 |
|
|
STO* |
18-2 |
2 or More |
0.030 Rubber++ |
0.060 Plastic++ |
60 |
75, 90, 105 |
600 |
|
|
SRD |
18-4 |
3 or 4 |
0.045 Plastic++ |
0.060 Rubber++ |
60 |
-- |
300 |
|
|
SRDT |
18-4 |
3 or 4 |
0.045 Rubber++ |
0.060 Plastic |
60 |
90 |
300 |
|
|
HPN(FLAT) |
18-12 |
2+ |
0.045 Neoprene++ |
-- |
90 |
75, 90, 105 |
300 |
|
|
HPD |
18-12 |
2,3,4 |
0.030 Rubber++ |
Yam Braid |
90 |
75, 90 |
300 |
|
|
HSJ |
18-12 |
2, 3, 4 |
0.030 Rubber++ |
0.060 Rubber |
90 |
-- |
300 |
|
|
HSJO |
18-12 |
2, 3, 4 |
0.030 Rubber++ |
0.030 Neoprene |
90 |
-- |
300 |
|
|
HSO |
14-12 |
2, 3, 4 |
0.045 Rubber |
0.060 Rubber |
90 |
-- |
300 |
|
|
HSO |
14-12 |
2, 3, 4 |
0.030 Rubber |
0.060 Neoprene |
90 |
-- |
300 |
|
info@angrovesales.com